10% OFF

Mismo precio en 6 cuotas de

Llega gratis entre el miércoles y el lunes 13/mayo

Stock disponible

10% OFF

Características principales

Marca
Hikvision
Línea
Switch
Modelo
DS-3E1309P-EI/M

Especificaciones

  • Homologación Anatel Nº: 119892304444

Ver más características

Descripción

GENERAL
Carcasa Metal material, fan-free design
Peso Neto 0.35 kg (0.77 lb)
Peso Bruto 1.114 kg (2.45 lb)
Dimensiones (W X H X D) 170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
Temperatura De Funcionamiento 0 °C to 40 °C (32 °F to 104 °F)
Temperatura De Almacenamiento -40 °C to 85 °C (-40 °F to 185 °F)
Condiciones De Humedad 5% to 95% (no condensation)
Humedad Relativa 5% to 95% (no condensation)
Fuente De Alimentación 48 VDC, 2.5 A
Modo De Instalación Desk-Mounted,Wall-Mounted
Max. El Consumo De Energía 120 W
Consumo De Energía En Inactivo 10 W
Surge Protection 6 KV
PARÁMETROS DE RED
Puertos 8 × 10/100 Mbps PoE port,1 × 1 Gigabit RJ45 port
Tabla De Direcciones MAC 16 K
Tasa De Reenvío De Paquetes 4.17 Mpps
Caché Interna 4 Mbits
Capacidad De Conmutación 5.6 Gbps
FUENTE DE ALIMENTACIÓN POE
PoE Standard IEEE 802.3af,IEEE 802.3at
Pin De Alimentación PoE 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Puerto PoE PoE: Ports 1 to 8
Max. Puerto De Alimentación 30 W
PoE Power Budget 110 W
FUNCIÓN DE SOFTWARE
Largo Alcance
Ports 1 to 8: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c for third-party management platform access.
Support port mirroring for fault locating.